softfan
Up - Code - softfan - glPresent - BlargCPU

softfan is a controller for fans hanging off of a parallel port, usually controlled by nice chubby power transistors. It expects to set pin 2 (data0) high to enable the fan, and low to disable the fan. softfan knows how to PWM the fan at 50% and 75% duty cycles over 10ms, as well as set the fan full off and full on.

The most recent version is 0.10. Get it here. It does not have a Makefile - just compile it as the simple C file that it is.

		0 && substr_count($ip,".") == 0){ echo "Congratulations! You're using IPv6!"; } else { echo "You are connected via IPv4."; } ?>
confused?	confused?	confused?