Differences

This shows you the differences between two versions of the page.

--- projects:ndfslave [2014/08/04 19:07]
joshuawise [Conclusions]
+++ projects:ndfslave [2014/08/05 04:16]
joshuawise [Data extraction]
@@ Line 104: / Line 104: @@
 "dead-bug" soldering style -- soldering AWG 36 leads directly to each pin --
 but this proved ultimately too painful to carry out for the whole IC.
-Ultimately, I settled on using a Schmartboard; I sliced it in half, and
+Ultimately, I settled on using a [[http://www.schmartboard.com/index.asp?page=products|Schmartboard]]; I sliced it in half, and
 allowed each side to self-align.  This meant that I didn't have to worry
 about straightening both sides at the same time -- as long as I got them
@@ Line 137: / Line 137: @@
 The end result of this phase was a pair of 12GiB files, ''flash.cs0'' and ''flash.cs1'', which contained the raw data from the NAND flash medium.
 ===== Unwhitening =====